Operator's Manual Part 1

1. OPERATIONAL OVERVIEW
1-12
1.5.4 Selecting image source
When more than one network radar or a blackbox echo sounder is connected to
the equipment you may select image source for each as shown below. This is not
necessary when only one network radar or echo sounder is connected.
1. Press the [DISP] key.
2. Press any soft key to show the following display.
RADAR SOURCE
RADAR
SOUNDER SOURCE
ETR
IF THERE IS MORE THAN
ONE NETWORK RADAR OR
ECHO SOUNDER, YOU MAY
SELECT THE IMAGE
SOURCES FOR DISPLAY.
▲
SELECT
SOURCE
EDIT
RETURN
Select source menu
3. Select RADAR SOURCE or SOUNDER SOURCE as appropriate and press
the EDIT key.
RADAR SOURCE
RADAR
SOUNDER SOURCE
SOUNDER
Radar source Sounder source
Radar source and sounder source windows
4. Enter host name with the [ENTER] knob.
5. Press the RETURN soft key to finish.
6. Press the [MENU] key to close the menu.