User Manual

FURUNO FAR-21x7(-BB)/28x7 SERIES
SP - 2 E3519S01L-P
3. DISPLAY UNIT
1. Screen Raster scan, daylight bright, yellow or green echoes in 32 levels
2. Scanning Non-interlace at 64 kHz horizontal, 60 Hz vertical
3. Display
FAR-21x7
series
FAR-21x7
series
FAR-21x7
series
FAR-28x7
series
Size, model 17-inch color
LCD, MU-170C
19-inch color
LCD, MU-190
20.1-inch color
LCD, MU-201CR
23.1-inch color
LCD
,
MU-231/231CR
Display area
(mm)
338 x 270 376.32 x 301.06 399.36 x 319.49 470.4 x 352.8
Resolution 1280 x 1024
pixels
1280 x 1024
pixels
1280 x 1024
pixels
1600 x 1200
pixels
Effective
radar
diameter
260 mm
(H: 64 kHz;
V: 60 Hz)
290 mm
(H: 64 kHz;
V: 60 Hz)
308 mm
(H: 64 kHz, V: 60
Hz)
340 mm
(H: 75 kHz, V: 60
Hz)
Viewable
range
920 mm 1020 mm 1080 mm 1200 mm
4. Minimum range Minimum range: 20 m w/raw video, + 0-2 m w/digitize error
5. Range discrimination Range discrimination: 20 m w/raw video, + 0-6 m w/digitize error
6. Range scales (nm), ring interval
Range (nm) 0.125 0.25 0.5 0.75 1.5 3 6 12 24 48 96
Ring interval (nm) 0.025 0.05 0.1 0.25 0.25 0.5 1 2 4 8 16
No. of rings 5 5 5 3 6 6 6 6 6 6 6
7. Range accuracy Within 1%
8. Bearing discrimination 0.98° (XN5A), 2.1° (XN12AF), 1.5° (XN20AF), 1.2° (XN24AF),
2.0° (SN36AF)
9. Bearing accuracy ±1°
10. Presentation mode Head-up, Head-up TB, North-up, Course-up, True Motion (sea or
ground stabilization)
11. Target tracking (TT)
Auto or Manual acquisition: 100 targets in 0.2-24(32) nm
Auto tracking on all acquired targets
12. Radar map Nav lines, coastlines, buoys, etc. produced by operator. 20,000 pts
in radar mode, 6000 pts on IC card in chart mode
13. Acquisition zone AZ1: 0.5 nm width sector, within 3-6 nm, desired bearing
AZ2: 1 nm width sector or polygon, desired range and bearing
14. Parallel index line Choice of 1, 2, 3 or 6 lines
15. AIS IMO SN Circ.217, IEC 62388
16. Chart cards FURUNO and NAVIONICS
4. INPUT/OUTPUT
1. Heading signal input - Synchro signal (20-100 VDC, 20-135 VAC 50/60/400/500 Hz),
- Stepper signal (20-100 V)
- AD-10 format
2. Speed log IEC 61162-1
3. AIS data (IEC 61162-2) VDM, VDO, ALR
4. Input data sentences (IEC 61162-1)
BWC, BWR, DBS, DBT, DPT, DTM, GGA, GLL, HDT, RMA, RMB,
RMC, RTE, VBW, VDR, VHW, VTG, VWT, MTW, MWV, WPL, ZDA
5. Output data sentences (IEC 61162-1)
TLL, RSD, TTM, OSD, ESP