User Manual Part 2

1. DESCRIPTION OF OPERATION
1-47
3. Use the Cursorpad (S or T) to select [Alarm Status] and press the ENTER key.
Alarm Status display
4. Press the CANCEL/HL OFF key to close the alarm status display.
5. Press the MENU key to close the menu.
Alarm category Meaning
SIGNAL MISSING*
TRIGGER Trigger signal lost (only for remote display)
HEADING Heading signal lost
BEARING Bearing signal lost
GYRO AD-10 format gyro signal lost
VIDEO Video signal lost
POSITION NMEA format position data lost
NMEA_HDG NMEA format heading signal lost
TARGET ALARM1(2)
IN An echo has entered a target alarm zone.
OUT An echo has exited a target alarm zone.
ARPA ALARM
COLLISION CPA and TCPA of an ARPA target is less than CPA and
TCPA alarm settings.
LOST Acquired ARPA target becomes lost.
PROXIMITY The range to an ARPA target is less than the user-set
proximity alarm range.
AIS ALARM
COLLISION CPA and TCPA of an AIS target is less than CPA and
TCPA alarm settings.
PROXIMITY The range to an AIS target is less than the user-set prox-
imity alarm range.
TRIGGER HEADING BEARING GYRO
VIDEO POSITION NMEA_HDG
IN OUT
IN OUT
COLLISION LOST PROXIMITY
COLLISION PROXIMITY
TX ANT CH1 CH2 CH70 FAIL MKD
EPFS L/L SOG COG HDG ROT
OVER_TEMP