User Manual Part 2

1. DESCRIPTION OF OPERATION
1-48
*: Have a qualified technician check the equipment.
1.40 Echo Area
You can select the display area from [Normal] or [Full Screen].
Echo area
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Display] and press the ENTER key.
AIS SYSTEM*
TX TX stopped or TX error
ANT Antenna VSWR problem
CH1 TDM2 RX1 board problem
CH2 TDM2 RX2 board problem
CH70 RX channel 70 problem
FAIL System failure
MKD Minimum input device lost
EPFS Navigator (GPS, etc.) problem
L/L Position data lost
SOG Speed data lost
COG Course data lost
HDG Heading data lost
ROT Rate of turn data lost
OTHER*
OVER_TEMP The temperature of the equipment is more than the spec-
ified value.
Alarm category Meaning
Normal
Full Screen
Area in which echoes are displayed