User Manual Part 2

1. DESCRIPTION OF OPERATION
1-37
1.28.3 How to set custom setups
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Custom 1 (2 or 3)] and press the ENTER
key.
Custom menu
3. Set menu items.
Note: For easy set up, you can copy the settings of the [Echo] menu (to [Custom
1], [Custom 2], [Custom 3]). Select [Copy] and press the ENTER key. When the
copying is completed, the message "Complete" appears. To erase this message,
press any key.
4. Press the MENU key to close the menu.
[Pulse Length] [Short] or [Long], you can select on 1.5, 1.6, 3.0 and 3.2 nm
ranges.
1.18
[Echo Stretch] [Off], [1], [2], [3] 1.22
[Echo Average] [Off], [1], [2], [Auto] 1.23
[Noise Rejector] [Off], [On] 1.30
[Wiper] [Off], [1], [2] 1.31
[Int Rejector] [Off], [1], [2], [3] 1.14
[Display-Dynamic] [Narrow]: Erase weak echoes.
[Normal]: Normal use
[Wide]: Display weaker echoes compared to [Narrow].
1.36
[Display-Curve] [1]: Reduce weak echoes.
[2]: Normal use
[3]: Display weaker echoes in stronger color compared to [1].
1.37
[Color Erase] 0 - 11 1.44.3
Menu item Available settings See section