User Manual Part 2

1. DESCRIPTION OF OPERATION
1-42
1.34.2 Custom colors
The custom color design lets you select preferred echo, background, characters,
range rings and marks colors. Select [Custom] in the [Display Color] menu item (see
section 1.34.1) to use the user selected echo, background, characters, range rings
and marks colors.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Brill/Color] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Echo Color] and press the ENTER key.
Echo Color options
4. Use the Cursorpad (S or T) to select an echo color and press the ENTER key.
[Multi] displays echoes in colors of red, yellow and green according to echo
strength, and [Multi] is not available in the [IEC] or [Russian-River] mode.
5. Use the Cursorpad (S or T) to select [Background Color] and press the ENTER
key.
Background Color options
6. Use the Cursorpad (S or T) to select a background color and press the ENTER
key.
7. Use the Cursorpad (S or T) to select [Character Color] and press the ENTER
key.
Character Color options
8. Use the Cursorpad (S or T) to select a character color (including range rings and
marks) and press the ENTER key.
9. Press the MENU key to close the menu.