User's Manual

FURUNO U.S.A., INC.
Camas, WA
[phone]
www.furunousa.com
Denton, MD
[phone]
000-167-964
6 meter NMEA2000
Backbone cable
(supplied)
000-154-054 NMEA
Pigtail cable
5 meter
(not supplied)
white = NMEA2000 (+)
blue = NMEA2000 (-)
12 / 24 VDC
2 x 1A fuse
(not supplied)
RD33
NEW RD33 Display with NMEA0183 Smart Sensor
(Powered Directly from 12/24 VDC source)
NMEA0183 Smart
Sensor
To NMEA2000 Backbone cable
Cut the supplied 6m cable to the
appropriate length to connect to the
NMEA2000 backbone.
Use the other end (5 pin male) for the
power connection as shown below.
Connect to a breaker panel or switch so
that the transducer may be turned off
when not in use. (not supplied)
RD33 NMEA0183
Input / Output
White = TX (+)
Black = TX (-)
Yellow = RX (+)
Green = RX (-)
TX = Transmit
RX = Receive
NOT USED