Operator's Manual

SAFETY INSTRUCTIONS
iii
WARNING
CAUTION
Turn off the power at the
switchboard before beginning
the installation.
Fire or electrical shock can result
if the power is left on.
Safety Instructions for the Installer
Be sure that the power supply is
compatible with the voltage
rating of the equipment.
Connection of an incorrect power
supply can cause fire or damage
the equipment.
Observe the following compass
safe distances to prevent
interference to a magnetic
compass:
Standard
compass
Steering
compass
Antenna
Unit
Power
Supply Unit
Type
PR-240
Do not install the equipment
where it may get wet from rain
or water splash.
Water in the equipment can result
in fire, electrical shock or damage
to the equipment.
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel can work
inside the equipment.
GPA-017S
AIS
Transponder
FA-70
Radiation Hazard
Do not approach the antenna
closer than x.x m when it is
transmitting.
The antenna emits radio waves
which can be harmful to the human
body, particularly the eyes.
WARNING
Radiation level
100 W/m
2
10 W/m
2
Distance
GPA-017
0.3 m 0.3 m
0.3 m 0.3 m
0.9 m 0.6 m
N/A
N/A
GPA-C01
0.3 m 0.3 m
0.3 m 0.3 m
2 W/m
2
0.2 m