Users Manual

AP-1
APPENDIX 1 MENU TREE
AIS Setting Tool (PC)
Initial Setup Status (Shows the status for transmission and reception of AIS.)
TX Mode (SOTDMA, CSTDMA)
SART Test RX (OFF, ON)
DSC Monitoring (OFF, ON)
Long-Range TX
*1
(OFF, ON)
Silent Mode Controller (Hardware Switch, Software Switch)
Silent Mode
*2
(Normal (TX/RX), RX Only)
Ship Static
MMSI (Enter the MMSI number.)
Ship Name (Enter the ship’s name.)
Call Sign (Enter the call sign.)
Ship Type (0: Not Available or No ship, 1: Reserved for Future Use, 2: WIG,
3: Vessel, 4: HSC, 5: Special Craft, 6: Passenger Ships, 7: Cargo Ships,
8: Tanker(s), 9: Other Types of Ship)
Cargo Type (Options are differ depending on the setting in [Ship Type].)
Serial Number (Shows the serial number for the equipment.)
Antenna Position (GNSS) (A/B: 0 to 511 m; 0 m, C/D: 0 to 63 m; 0 m)
IO Setup Common
Port Priority (Heading)
1st (NMEA2000, NMEA1, NMEA2)
2nd (NMEA2000, NMEA1, NMEA2)
3rd (NMEA2000, NMEA1, NMEA2)
NMEA2000
CAN Unique Number (Shows the CAN unique number.)
CAN Address (Shows the CAN address.)
Output Mode (OFF, AIS, GNSS, AIS + GNSS)
Format (NMEA2000 V2, NMEA2000 V1)
NMEA0183
NMEA1 / NMEA2
Output Mode (OFF, AIS, GNSS, AIS + GNSS)
Speed (AIS: 38400 bps, Sensor: 4800 bps)
*3
Output GNSS (OFF, GGA + VTG Sentences, GLL + VTG Sentences,
RMC Sentence)
*4
Own Vessel Data View Channel
CH A: (Shows the channel number and TX/RX mode for channel A.)
CH B: (Shows the channel number and TX/RX mode for channel B.)
Power (Shows the transmission power.)
Region List (Shows the channel management information of local sea areas.)
Sensor Status (Shows the sensor information.)
GNSS Status (Shows the GNSS information.)
Bold italic: Default
1
*4
: These options are selectabled when [Output
Mode] is set to [GNSS] or [AIS + GNSS].
*2
: This menu item is displayed when [Silent
Mode Controller] is set to [Software Switch].
*1
: This menu item is displayed when
[TX Mode ] is set to [SOTDMA].
*3
: Fixed to [AIS: 38400 bps] when [Output Mode]
is set to [AIS] or [AIS + GNSS].