Users Manual Part 6

5. PLOTTER OPERATION (IMO-TYPES)
5-10
5.7 How to Use ECDIS Chart Marks
Note: This function is only available if [ECDIS] is set to [SERIAL] or [LAN] at installa-
tion. Consult your dealer for details.
You can display marks received from an ECDIS on the radar screen. If the received
mark also contains predicted position data, the predicted position is also displayed on-
screen.
1. Open the menu.
2. Select [2 MARKS].
3. Select [6 ECDIS MARKS DISPLAY].
4. Select the appropriate item.
• [2 USER CHART]: Shows/hides received user
charts.
• [3 CURVED EBL]: Shows/hides the received
Curved EBL.
• [4 CHART SYMBOL]: Shows/hides the re-
ceived chart symbols.
• [5 NOTE BOOK]: Shows/hides the received
notes. [ON] shows notes only when they are received. [DISPLAY] shows notes
continuously. The notes are shown in the information box at the right-side of the
screen.
• [6 ROUTE]: Shows/hides the received route. [CENT] shows only the route line;
[ALL] shows both the route line and the route width.
• [7 PREDICTOR]: Shows/hides the received predicted position with a symbol
(dotted line) of the same size as the own ship.
5. Select [ON] or [OFF] as appropriate, then press the ENTER MARK key. [ON]
shows the selected item’s ECDIS mark when received, [OFF] hides the ECDIS
mark.
6. Close the menu.