Users Manual Part 6

5. PLOTTER OPERATION (IMO-TYPES)
5-11
5.8 Own Ship Track
A total of 20,000 points are allotted for storage of own ship’s track, marks and lines.
When this memory becomes full, the oldest track is deleted to make room for the lat-
est. For that reason you may want to adjust the recording interval to conserve the
memory.
Note: You can check how many tracks have been used at any time from the [RADAR
MAP] menu. The number of points used and the total number available are shown at
the bottom of the [RADAR MAP] menu’s first page.
5.8.1 How to show/hide tracks
You can show or hide tracks for own ship.
1. Open the menu.
2. Select [2 MARKS].
3. Select [7 TRACKS].
4. Select [2 OWN TRACK].
5. Select [2 DISPLAY OWN TRACK].
6. Select [ON] to show tracks, or [OFF] to
hide tracks.
7. Close the menu.
Own ship track
points used/total
number of own ship
track points available
Select