Users Manual Part 6

5. PLOTTER OPERATION (IMO-TYPES)
5-14
How to enter/edit waypoints from the menu
Note: A waypoint cannot be edited if it is part of an active route.
1. Open the menu.
2. Select [8 NAVLINE•WPT].
3. Select [2 WPT SET].
4. Select [2 WPT NO. SELECT].
5. Spin the scrollwheel, or use the control unit numbered keys, to select a waypoint
number, then left-click.
To edit or input a waypoint name, go to step 6.
To skip naming the waypoint, go to step 7.
6. Select [3 WPT NAME], then left-click. The software keyboard appears. Referring
to section 1.5.3, name the waypoint.
7. Select [4 WPT L/L]. The latitude and longitude settings can now be adjusted.
8. Input the latitude and longitude with the number keys, or spin the scrollwheel to
select a digit, then left-click to move to the next digit.
9. Close the menu.
5.9.3 How to edit waypoints
Note: A waypoint cannot be edited if it is part of an active route.
1. Open the menu.
2. Select [8 NAVLINE•WPT].
3. Select [2 WPT SET].
4. Select [2 WPT NO. SELECT].
5. Select the waypoint number to edit.
6. Select the waypoint data to edit, then make necessary changes.
• [WPT NAME]: Use the software keyboard to change the name.
• [WPT L/L]: Spin the scrollwheel to change the latitude and longitude position of
the waypoint.
7. Close the menu.
WPT L/L
WPT L/L
Use the scrollwheel to select a numeral,
then left-click. The cursor jumps to to
next right place. Repeat to enter the
latitude and longitude.