Users Manual Part 6

5. PLOTTER OPERATION (IMO-TYPES)
5-20
5.10.6 How to use the waypoint arrival distance function
The waypoint arrival distance function lets you know when you are within a preset dis-
tance from the next waypoint. When the waypoint arrival area is set, the next waypoint
is shown circumscribed with an dashed orange-colored circle, whose radius is equiv-
alent to waypoint arrival distance setting. When your vessel comes within the destina-
tion arrival radius, the system places the arrival radius marker on the next destination.
To set and use the waypoint arrival area function, follow the procedure below.
1. Open the menu.
2. Select [8 NAVLINE•WPT].
3. Select [0 NEXT] to show the second page of the [NAVLINE•WPT] menu appears.
4. Select [2 WPT ARRIVAL DIST].
5. Set the width (radius) of the arrival area.
6. Close the menu.
5.10.7 How to delete internal routes
You can delete a specified route, or all routes.
Note: Active routes and routes from external sources cannot be deleted.
How to delete individual internal routes
1. Open the menu.
2. Select [8 NAVLINE•WPT].
3. Select [8 NAVLINE SET].
4. Select [2 SELECT NAV LINE].
5. Spin the scrollwheel, or input the number from the keyboard, to select the route
you want to delete.
6. Select [5 CLEAR DATA].
7. Select [YES] to delete the selected route.
8. Close the menu.
How to delete all internal routes
1. Open the menu.
2. Select [2 MARKS].
3. Select [8 DELETE DATA].
4. Select [4 ALL NAV LINES].
5. Select [YES] to delete all internal routes.
6. Close the menu.
Waypoint arrival radius