Users Manual Part 6

6. PLOTTER OPERATION (C-TYPES)
6-2
How to show/hide the own ship vector
Follow the procedure below to show or hide the own ship vector.
1. Open the menu.
2. Select [9 INITIAL SETTINGS].
3. Select [5 OPERATION].
4. Select [4 OWN SHIP VECTOR].
5. Select one of the following:
• [OFF]: Hide the own ship vector.
• [HDG]: The own ship vector points in heading direction.
• [COURSE]: The own ship vector points in course direction.
6. Close the menu.
How to show/hide other ships’ tracks
The following are required in order to show other ships’ tracks.
• A AIS transponder or GPS buoy
• Own ship position data
• Set up on this radar
• See "SYMBOLS" on page AP-32 for TT and AIS symbols.
Do the following to show or hide the consort symbol, GPS buoy symbol.
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 CONSORT•GPS BUOY].
4. Select [5 CONSORT DISPLAY] or [6 GPS BUOY
DISPLAY].
5. Select [ON] or [OFF] as appropriate. The follow-
ing symbols may appear when [ON] is selected.
6. Close the menu.
How to change the size of the target no. display for consort ship, GPS buoy
Do the following to change the size of the target no. display for consort ship, GPS
buoy.
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 CONSORT•GPS BUOY].
4. Select [7 SIZE OF TARGET NO].
5. Select [OFF] (hide target no. display), [SMALL] or [LARGE] as appropriate.
6. Close the menu.
: GPS buoy symbol
: Consort ship symbol