Users Manual Part 6

6. PLOTTER OPERATION (C-TYPES)
6-6
How to connect non-recorded tracks after restarting recording
1. Open the menu.
2. Select [2 MARKS•PLOTTER].
3. Select [3 TRACK].
4. Select [7 JOIN STOPPED TRACKS].
5. Select [NO JOINT] or [JOIN] as required.
• [NO JOINT]: The point where recording was stopped is not connected to the
point where recording was resumed.
• [JOIN]: The point where recording was stopped is connected to the point where
recording was resumed.
6. Close the menu.
6.1.4 How to stop and re-start tracks
You can stop, or “pause” tracks, then re-start the same track as desired.
1. Right-click within the radar effective radius to show the [CURSOR] menu.
2. Select [TRACK ON-OFF].
3. Select the vessel whose tracks you want to stop (or re-start), then left-click.
4. Right-click within the radar effective radius to complete the procedure.
6.1.5 How to change track color
Track color is available in seven colors: red, yellow, green, light blue, purple, blue, and
white. For example, you may want to show track in red on the day you leave port to
distinguish from track related to other activities. The own ship track can color can be
automatically changed according to water temperature or depth.
How to change own ship’s track color
1. Right-click within the radar effective radius to show the [CURSOR] menu.
2. Select [TRACK COLOR].
3. Click within the radar effective radius. The [CHANGE TRACK COLOR] window
appears.
Own ship
Recording
stopped
A
ctual ship’s movement
(Dotted line not displayed.)
Recording
stopped
Points connected
with straight line.
Own ship
Recording
restarted
Recording
restarted
[NO JOINT] selected
[JOIN] selected