Users Manual Part 6

6. PLOTTER OPERATION (C-TYPES)
6-9
How to change own ship’s track color according to depth
If you selected [WATER DEPTH] as the track color reference, the track changes color
according to depth changes in the water. This makes it easier to see changes in depth
directly below your boat. there are two methods to change the track color:
• Method 1: change the color based on a depth range
• Method 2: change the color based on a preset difference
Note: This feature requires valid depth data input.
Method 1: depth-range-based color change
This method gives depths within the same range the same color. For example, if you
set the range between 200 m and 300 m, and the depth remains shallower than 300
m and deeper than 200 m, the color remains the same.
1. Open the menu.
2. Select [MARKS•PLOTTER].
3. Select [TRACK].
4. Select [OWN TRACK SETTINGS].
5. Select [NEXT] twice.
6. Select [TRACK COLOR BY DEPTH].
7. Select [RANGE].
8. Set the color for the depth range.
For example, to show depths from 400 m and be-
low in red color, do the following:
1) Select [RED].
2) Rotate the scrollwheel to set “0400.0”, then
press the left button.
3) Set the other colors in a similar manner.
Note 1: The depth intervals should be in ascend-
ing order.
Note 2: Depths below the [BLUE] setting appear
in white color.
9. Select [DEPTH DATA DISPLAY].
10. Select [ON] or [OFF] as required.
• [ON]: Show water temperature on the track.
• [OFF]: Hide water temperature on the track.
11. Close the menu.