Users Manual Part 6

6. PLOTTER OPERATION (C-TYPES)
6-10
Method 2: preset-difference-based color change
According to the setting, there are five colors which are used in a cycle to color the
track. In the example figure below, set the preset difference is set to [EV. 2] and the
Depth ranges from 170 m to 180 m. The color changes every 2 m.
1. Open the menu.
2. Select [MARKS•PLOTTER].
3. Select [TRACK].
4. Select [OWN TRACK SETTINGS].
5. Select [NEXT] twice.
6. Select [TRACK COLOR BY DEPTH].
7. Select [EV. 2], [EV. 20] or [EV. 200] as re-
quired.
• [EV. 2]: changes the color with every depth increase/decrease of 2 m.
• [EV. 20]: changes the color with every depth increase/decrease of 20 m.
• [EV. 200]: changes the color with every depth increase/decrease of 200 m.
8. Select [DEPTH DATA DISPLAY].
9. Select [ON] or [OFF] as required.
• [ON]: Show water temperature on the track.
• [OFF]: Hide water temperature on the track.
10. Close the menu.
How to change own ship’s track color based after a specified time
You can use the [AUTO COLOR CHANGE] feature to change your track color at a
specific time.
1. Open the menu.
2. Select [MARKS•PLOTTER].
3. Select [TRACK].
4. Select [NEXT].
5. Select [AUTO COLOR CHANGE].
6. Select [ON] or [OFF] as required.
If you select [ON], the cursor moves to the time indication.
7. Set the time at which you want the track to change color.
Tracks will change colors every day at this time.
8. Close the menu.
Own ship
Yellow
Red
Red
Magenta
Green
Blue
170 m
172 m
174 m
176 m
178 m
180 m
Example: gradually
increasing depth