Users Manual Part 3

1. OPERATIONAL OVERVIEW
1-102
1.44.2 How to hide/show the stern mark
The stern marker, which is a dotted line, appears opposite to the heading line.
To display or erase this marker do the following:
1. Open the menu.
2. For IMO-types, select [2 MARKS]
For C-types, select [2 MARKS•PLOTTER].
3. For IMO-types, select [3 STERN MARK].
For C-types, select [7 STERN MARK].
4. Select [ON] or [OFF] as appropriate.
5. Close the menu.
1.44.3 North mark
The north mark is displayed as a short dotted line on the inside
edge of the operational display area. In HEAD UP mode, the
north mark moves according to the own ship bearing.
The north mark is hidden when the radar is in standby mode.
How to change the mark thickness (C-types only)
If your radar is a C-type, you can change the thickness of the
north mark with the following procedure.
1. Open the menu.
2. Select [2 MARKS•PLOTTER], then select [0 NEXT].
3. Select [5 NORTH MARK WIDTH].
4. Select the desired width.
• NORMAL: North mark is display with the normal width.
• X3: Increase width to three times the size of normal.
• X5: Increase width to five times the size of normal.
• X7: Increase width to seven times the size of normal.
5. Close the menu.
Stern line
North mark