Users Manual Part 7

3. ADJUSTMENTS

3-7

[VIDEO CONTRAST]

Select [ADVANCE] to clarify the echo image difference (default: [ADVANCE]).

[CLOSE TGT ES MODE], [CLOSE TGT ES LEVEL]

Not used, for future use.

[EAV MODE]

Select the method of echo average, [A] or [B].

[A]: Suppress surface reflections, set to assist in detecting other ships clearly.

[B]: Normal use, set to detect small targets or fishing equipments in sea clutter.

Note: This function is available only for IMO/C-type radars installed with software ver-

sion “50.**”.

3.5.2 [OWN SHIP INFO] menu

Enter the length and width of the ship, and scanner, GPS antenna and conning posi-

tions, referring to the description and figure below.

Note: This radar uses [CONNING POSITION] for CCRP and [SCANNER POSITION]

for ANT as reference points for measurements and calculations. The commissioning

engineer should understand this point, and enter own ship information accordingly.

Open the main menu then select [RADAR INSTALLATION] [OWN SHIP INFO] to

open the [OWN SHIP INFO] menu.

CONTRAST

LEVEL

CONTRAST

LEVEL

CONTRAST

LEVEL

CONTRAST

LEVEL

B C

[

VIDEO CONTRAST

]

set to

[

ADVANCE

]

at installation:

[

VIDEO CONTRAST

]

set to

[

LEGACY

]

at installation:

CONTRAST

444