Users Manual Part 8

6. PLOTTER OPERATION (C-TYPES)
6-68
Setting the departure alert
The departure alert works informs you when your vessel passes a set distance from
the waypoint. When the departure alert is active, an orange dashed circle marks the
alert range.
1. Open the menu.
2. Select [ALERTS].
3. Select [ARRIVAL]. The [ARRIVAL] menu appears.
4. Select [WPT ARRIVAL ALERT].
5. Select [ON] to activate the alert area. The cursor moves to the [ALERT RANGE]
setting.
6. Set the alert range. This sets the radius for the alert area circle around each way-
point.
7. Close the menu.
To deactivate the alert, select [OFF] at step 5 of the above procedure.
6.7.2 How to set mid-route alerts
You can collectively enable, or disable mid-route alerts such as the arrival and depar-
ture alerts.
1. Open the menu.
2. Select [ALERTS].
3. Select [ARRIVAL]. The [ARRIVAL] menu appears.
4. Select [MID ROUTE ALERTS].
5. Select [ON] to enable, or [OFF] to disable the mid-route alerts.
6. Close the menu.
: Alert range
Own ship
Setting range