Users Manual Part 8

6. PLOTTER OPERATION (C-TYPES)
6-73
Chart Icons
The chart icon appears at the top-left section of the screen. The icon changes depend-
ing on the chart status, as shown below.
6.8.2 How to align the chart position
When the radar target and the chart are not overlaid correctly, align the chart position.
1. Right-click the operational display area to show the [CURSOR MENU].
2. Select [MAP ALIGN]. The cursor is now highlighted and the [MAP ALIGN] function
is active.
3. Left-click the map at the location you want to move. The map is now “anchored”
to the cursor.
4. Move the cursor to align the radar map with the radar screen, then left-click. The
indication "MAP ALIGN" appears on the right side of the operational display area.
5. Right-click to deactivate the [MAP ALIGN] function.
Display indications affected by map alignment
The following items are also re-aligned when the [MAP ALIGN] function is activated.
Display indications unaffected by map alignment
The following items are not re-aligned when the [MAP ALIGN] function is activated.
Chart Icons Meaning
Suitable chart scale.
Unsuitable chart scale. Press the ZOOM IN or ZOOM OUT key to
adjust the chart scale.
No chart file.
Note 1: When you activate or deactivate the [MAP ALIGN] function, trails for both own
ship and other ships are not reset.
Note 2: Chart alignments are not retained when the radar power is turned off.
• Map marks
• Drop marks
• Anchor watch settings
• Target tracks
• AIS symbols
• EBL offsets (STAB GND mode only)
• Origin marks
• NAV lines and waypoints
• MOB marks
• Own ship tracks
• Latitude/Longitude Grid
• AIS symbol vector display
• Zoom window display (STAB GND mode
only)
• Cursor position coordinates (when CUR-
SOR L/L ALIGN is set to [ON] only)
• Radar echoes
• TT symbol vector display
• PI lines
• Own ship mark
• TT symbols
• EBL/VRM reference point
• OS coordinates ([POSN]) display
• Barge mark