Users Manual Part 9

APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
AP-24
- 52001,46 HW STATUS NO-
TICE
Caution
Cat: B
Message: "RF-CONV:INTPUT SIGNAL
LEVEL ERROR"*
4
Meaning: Signal input to the RF Con-
verter is outside rating.
Remedy: Press the ALARM ACK key. Have a qualified technician check the RF-Converter.
- 52001,47 HW STATUS NO-
TICE
Caution
Cat: B
Message: "HPA:OUTPUT SIGNAL
LEVEL ERROR"*
4
Meaning: Signal output from the HPA
board is outside rating.
Remedy: Press the ALARM ACK key. Have a qualified technician check the HPA board.
- 52001,48 HW STATUS NO-
TICE
Caution
Cat: B
Message: "HPA:OUTPUT PEAK CUR-
RENT ERROR"*
4
Meaning: Peak current detected in the
signal output from the HPA board.
Remedy: Press the ALARM ACK key. Have a qualified technician check the HPA board.
- 52001,52 HW STATUS NO-
TICE
Caution
Cat: B
Message: "VSWR ERROR"*
4
Meaning: Abnormal VSWR detected by
the RF Converter.
Remedy: Press the ALARM ACK key. Have a qualified technician check the antenna.
83 52002,01 HW STATUS ER-
ROR
Warning
Cat: B
Message: "RPU FAN1 NO ROTATION"
Meaning: Fan1 in the processor unit is
stopped or disconnected.
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
84 52002,02 HW STATUS ER-
ROR
Warning
Cat: B
Message: "RPU FAN2 NO ROTATION"
Meaning: Fan2 in the processor unit is
stopped or disconnected.
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
85 52002,03 HW STATUS ER-
ROR
Warning
Cat: B
Message: "RPU FAN3 NO ROTA-
TION"*
6
Meaning: Fan3 in the processor unit is
stopped or disconnected.
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
86 52002,04 HW STATUS ER-
ROR*
5
Warning
Cat: B
Message: "RPU FAN (RP) NO ROTA-
TION"
Meaning: The RPU fan on the RP board,
in the processor unit, is stopped or dis-
connected.
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
87 52002,05 HW STATUS ER-
ROR*
5
Warning
Cat: B
Message: "RPU RP HW ERROR"
Meaning: The RP board has stopped
working.
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
- 52729,01 POSN INT ERROR Caution
Cat: B
Message: "POSN INTERVAL ERROR"
Meaning: Positioning interval (Lat/Lon)
cycle has exceeded 10 seconds for a
period of three minutes or more.
Remedy: Press the ALARM ACK key. Check the output settings for the connected EPFS device.
Adjust output interval (cycle) as required.
ALR
Alert ID
ALF
Alert ID
Alert title
Priority &
Category
Alert description