Users Manual Part 6

3. ADJUSTMENTS
3-10
[ANT STOPPED]
For qualified technician. [ANT STOPPED] prevents transmission while the antenna is
stopped in STBY (default: [STBY]).
[DUAL RADAR SETTINGS]
When installing two FAR-2xx8 series radars, the im-
age from both radars (main radar and external radar)
may be shown together on one radar display.
Note 1: This function is NOT available between the
FAR-2xx8 radar and other radars.
Note 2: This function is available only for A/B type
radars installed with software version “01.**”.
Note 3: When [COMBINE] is selected, some func-
tion are unavailable. The following table shows the
available menus in the [RADAR INSTALLATION]
menu when [COMBINE] is selected. For menu operations, see the Operator’s manual
(OME-36520). The unavailable menus are displayed in gray.
• [DUAL RADAR]: Select [COMBINE] to enable the
dual radar display. If the radars other than FAR-2xx8
series radars are on the network, select [OFF].
Note: When the [WAVE MODE] ([ECHO][WAVE
MODE]) setting is [ON], this menu is displayed in gray
and not operative.
• [COMBINE MODE]: Select the reference of the an-
tenna position, own radar or external radar.
[OWN]: Set own radar’s antenna as the reference
point and set display area of own radar. The area out-
side that set here is where the image from the exter-
nal radar is displayed.
[EXT]: Set the external radar’s antenna as the refer-
ence point and set the display area of the external radar. The area outside that set
here is where the image from own radar is displayed.
[RADAR INSTALLATION]
menu
Available menus
[ECHO ADJUSTMENT]
[OWN SHIP INFO]
— (All menus are not available.)
[SCANNER] [DUAL RADAR SETTINGS] except for [EXT RADAR]
[INSTALLATION] [REMOTE MAINTENANCE], [SYSTEM MONITOR] and
[ANT CABLE].
[TT PRESET] — (All menus are not available.)
[BAUD RATE] All menus are available.
[ALERT I/F SETTINGS]
[INPUT PORT SETTINGS]
All menus are available.
[NETWORK SETTINGS] [VDR SETTINGS], [ RX SETTINGS]
[OTHER SETTINGS] [OVERLAY1], [OVERLAY2], [EAV W/O GYRO], [ECDIS],
[EXT BRILL CONTROL]
Image from
external radar
Image from
external radar
Image from main radarImage from main radar