Users Manual Part 7

2. WIRING

2-60

4. Bind all cables with cable ties supplied locally (two places).

5. Check that armor of cables are lying in their respective cable slots then fasten the

cable clamp.

Microwave coaxial plug

Attach the microwave coaxial plug to the coaxial cable. See the applicable FURUNO

technical information for the procedure. Attach the coaxial cable assembly to the

transceiver unit as follows:

1. Unfasten four bolts (M610) to remove the dust cover from the output WG adapt-

er.

2. Fasten eight bolts (removed at step 1) to attach the flange to the transceiver unit.

3. Attach the coaxial cable to the converter of the flange.

2.8 Processor Unit

2.8.1 How to fabricate cables

For locations of cables and cores, see the sticker on the reverse side of the top cover.

(All dimensions in millimeters)

For how to connect the LAN modular plug, see "LAN cable" on page 2-5. For how to

connect the WAGO connector, see "WAGO connector" on page 2-6.

Cable tie

M6×10 (4 pcs.)

Circulator

Adapter

Output WG

adapter

Coaxial cable

Converter

: M6×20 (8 pcs.)

Transceiver unit, inside view

Flange