Users Manual Part 7

2. WIRING
2-62
TTYCSLA series cable (for serial)
2.8.2 How to connect cables inside the Processor Unit
Connect the ground wire between the ground termi-
nal on the chassis and the ship’s earth.
How to open/close the top cover
Unfasten six screws (M48) to open the top cover
from the Processor Unit.
After the appropriate cable connections are com-
pleted, fasten six screws to close the top cover.
Connection of Antenna cable
For existing antenna cable, see section 2.10 "LAN Signal Converter".
6
Armor
SheathSheath
Vinyl tape
Crimp-on lug, supplied
(unit: mm)
4040
2525
1010
L
TTYCSLA-7
TTYCSLA-1Q
590
720
570
Cable type (JIS)
TTYCSLA-4
6
5
Drain wireDrain wire
Armor Sheath
Vinyl tape
Pass the heat-resistant tubing (supplied) onto the drain wire.
L
Crimp-on lug
(unit: mm)
8080
100100
Ground terminal