Operator's Manual

1. INSTALLATION
1-13
3. Enter URL as http://172.31.24.3 and press the Enter key. This number is the de-
fault value of FA-50.
4. Click Initial Setup to show the Initial Setup screen.
COM PORT setup
1. Click COM Port Setup to show the COM Port Setup screen.
2. The default setting for Data Type is IEC61162, which is suitable for most installa-
tions. If change is necessary, click the Data Type drop-down list and choose data
type as applicable, among the following choices.
*
1: Available when Ship Type is set for “8 Tanker(s)”.
*
2: Available only for ships that are not required to carry a class B transponder.
*
1
*
2
(default=IEC61162)