Installation Instructions
Table Of Contents
- SAFETY INSTRUCTIONS
- SYSTEM CONFIGURATION
- EQUIPMENT LISTS
- 1. MOUNTING
- 2. WIRING
- 3. INITIAL SETTINGS
- 3.1 Language Setting
- 3.2 Display Type
- 3.3 Transducer Data (FCV-1200L only)
- 3.4 Adjustment for Transceiver Unit, Video Sounder, Telesounder, Picture Recorder
- 3.5 Water Temperature Sensor Setting
- 3.6 Net Sonde Setting
- 3.7 Nav Data, Heading Sensor Setting
- 3.8 Stabilization (heaving compensation)
- 3.9 Propagation Velocity
- 3.10 Demonstration Mode
- 3.11 Restoring Default Settings
- 3.12 DIP Switch Setting
- APPENDIX 1 TRANSDUCER 50BL-12/50BL-24H
- APPENDIX 2 NEW BLT TRANSDUCERS
- APPENDIX 3 TRANSDUCER 82B-35R
- PACKING LISTS
- OUTLINE DRAWING
- INTERCONNECTION DIAGRAMS
3-17
8. Press [ ] to select NAV DATA, and then press [+] to open the dialog box.
LC LA DECCA GPS DR AUTO
9. Use [-] or [+] to select type of navigator connected, and then press [ ] or [ ] to close the
dialog box. AUTO (default setting) selects a navigator in the order of GPS, Loran C, Loran A,
Decca, DR (Dead Reckoning).
10. Press [
] to select COURSE, and then press [+] to open the dialog box.
TRUE MAG
11. Use [-] or [+] to select TRUE or MAG (magnetic bearing) as appropriate, and then press [ ]
or [
] to close the dialog box. TRUE is the default setting. If no navigator is connected, turn
the [FUNCTION] switch to other position to quit.
12. Press [
] to select TLL (Target Latitude, Longitude) OUTPUT, and then press [+] to open the
dialog box.
OFF ON
13. TLL OUTPUT enables or disables output of position data from the video sounder to external
equipment, at the moment the [MARKER TLL] key is pressed. Use [+] or [-] to select ON or
OFF (default setting) as appropriate, and then press [
] or [ ] to close the dialog box.
14. Turn the [FUNCTION] switch to EXIT position to quit.