Brochure

▲
Dual frequency display (50/200 kHz)*
The depth at the FORE and AFT positions can be displayed simultaneously.
▲
A variety of display modes available: NAV, OS DATA and HISTORY
▲
High contrast 8.4" LCD
▲
When interfaced with FURUNO remote display RD-20/50,
depth information can be observed at a remote location
▲
Optional printer interface available for printing out echogram
▲
Connecting a PC with the optional data recording software allows you
to store, compile and print out the past data of the echogram via PC
▲
BAM (Bridge Alert Management) ready**
Meets the specic requirements for alerts and interconnection with Bridge Alert
Management in IMO MSC.302 (87)
** BAM capability is to be implemented as software update after the product release in
early 2015.
▲
Depth data for the past 24 hours is storable in the internal memory
For the amount of data for storage and playback on the FE-800, please refer to "HISTORY"
on the right page. With the optional PC software, the sounding information can be stored
and played back for 24 hours, when the recording interval is set at 5 sec.
▲
Visual and audible alerts
The FE-800 generates alerts when the water depth below transducer is
shallower than a preset depth. When the seabed is lost due to the
lowered power supply or out of range scale, an alert is generated.
*When interfaced with two transducers
NAV Mode
Displays the depth numerically and graphically.
Single frequency display (FORE or AFT)
▲ ▲
OS DATA
HISTORY
LOGBOOK Alert Log List
Recording
interval
setting
5 sec
1 min
2 min
Amount of data
for storage
and playback
1 h
12 h
24 h
Displays Own Ship Data
(OS DATA)*
Displays the stored time,
depth and own ship position.
The logbook is capable of
storing data for up to 720 log
entries.
Optional printer and PC software to utilize the stored data
PC software
The past data can be stored on a PC with the optional software.
Also, printout function of the echogram is available via the optional printer PP-505-FE.
Color Presentation
Background: Black Echo: Amber Background: Black Echo: Red Background: Blue Echo: Red Background: White Text: Black
Displays a combination of
Contour and Strata echo
readings taken.
Displays the alert history
(containing up to 100 alerts).
* only available if the FE-800 is connected to
an external EPFS (Electronic Position-Fixing
System), such as a GPS navigator.
Printer PP-505-FE
Echo mode
Current range setting, reference point for the
depth reading (Transducer/Surface/Keel) as well
as currently selected mode are displayed.
A
This area shows the information specic to the
display mode currently selected. Please refer to
each of the display modes for details.
B
Local supplyOptionStandard
Remote Display
RD-20/50
IEC 61162-1 OUT
Power
Printer
PP-505-FE
Junction Box JIS F8821-1
Junction Box JIS F8821-1
Matching Box MB-502
Transducer Tank 50B-6B
Matching Box MB-504
Transducer Tank 200B-8B
VDR, ECDIS
IEC 61162-1 OUT x 2
IEC 61162-1 IN
IEC 61162-1 IN/OUT
Contact closure (Power Failure)
Ethernet
GPS
Alarm System or IF-2503
Alarm System
Network Equipment or PC
100-230 VAC
RS-232C
Display Unit
FE-8010
Transceiver Unit
FE-8020
Interconnection DiagramInterconnection Diagram
A
B
C
Graph mode Log mode
Guide to currently available actions is displayed.
Under an alert situation, the information about
the most imminent alert is displayed.
C
FURUNO Navigational Echo
Sounder FE-800 displays the
clearance below the ship in
the dual frequency operation*