Operator's Manual

1. OPERATION

1.18 How to Change the Unit of Measurement

You can change the displayed unit of measurement for depth and speed using the following

procedure.

1. Press the MENU/ESC key to open the Main menu.

2. Select [Display] using S or T, then press the ENT key.

3. Select [Unit] using S or T, then press the ENT key. This will open the

[Unit] pop-up window.

4. Select the [Depth] or [Speed] using S or T, then press ENT to open the

settings pop-up window. The available options are shown in the table below.

5. Press the MENU/ESC key three times to close the menu.

1.19 How to Select the Displayed Course

You can select a course reference, true or magnetic.

1. Press the MENU/ESC key to open the Main menu.

2. Select [Display] using S or T, then press the ENT key.

3. Select [Course] using S or T, then press the ENT key. This will open

a pop-up window.

4. Select the course display using S or T, then press ENT to apply the

setting. The available options are [True] and [Magnetic].

5. Press the MENU/ESC key twice to close the menu.

1.20 How to Change the Colour Scheme

You can change the colour scheme of the display as follows:

1. Press the MENU/ESC key to open the Main menu.

2. Select [Display] using S or T, then press the ENT key.

3. Select [Colour] using S or T, then press the ENT key. This will open a

pop-up window.

4. Select the colour scheme using S or T, then press ENT to apply the setting

and close the pop-up window. The available options are shown in the figure to the right.

5. Press the MENU/ESC key twice to close the menu.

Item Unit

Depth m (meters)

ft (feet)

Speed kn (knots)

MPH (Miles Per Hour)

km/h (Kilometers Per Hour)

Color scheme Background Color Text Color

Amber Black White

Black Black White

Blue White Black

White White Black