Operator's Manual

6. WEB FUNCTIONS
6-39
3. Click [Remote access].
4. Put the [9] mark in the checkbox beside [Enable]. To deactivate this function, re-
move the checkmark.
5. Enter the port number in [Port number] (1-65535).
Set the port number and then access http://<Global IP address>:<Port number>.
6. Set [Trusted IP address] as appropriate. Enter the IP address allowed to access.
If no IP address is entered, all IP addresses can access the web menu of
FELCOM250/500.
7. Click the [Apply] button. After completing the setting, the message "Completed"
appears.
8. Click the [OK] button.
6.1.13 How to change the password
Do the following procedure to change the SMS password, log password, and Admin-
istrator password. Write down the password in log so as not to forget the password. If
the password is lost, contact the dealer or retail supplier.
1. Click [Settings] in the menu bar.
2. Click [Password]. The following password setting screen appears.
3. Enter the new password in the [New password] field.
Solid black circles appears as characters. The number of characters is limited as
follows:
• SMS password: Max. 8 characters
• Log, Administrator password: 4-8 characters
4. Enter the new password again in the [Confirmation] field.