Operator's Manual

6. WEB FUNCTIONS
6-38
6. Click the [Add] button. The message "Comms will be disabled until finishing set-
ting and restarting CmmUnt. Are you sure you want to execute?" appears.
7. Click the [OK] button. After completing the setting, the message "Completed" ap-
pears.
8. Clisk the [OK] button again.
9. Restart FELCOM250/500. Reload the browser and then the main display ap-
pears.
6.1.12 How to set the Remote access
The Remote access lets you access the web menu settings of FELCOM250/500 via
internet.
Note 1: The following settings are recommended:
• Select a port number that is not narmally used.
• Use an IP address which has access.
Note 2: The Remote access settings must be done by the network administrator.
1. Click [Settings] in the menu bar.
2. Click [Network settings].
Service Select the service among Standard data, 8kbps Streaming,
16kbps Streaming, 32kbps Streaming, 64kbps Streaming,
128kbps Streaming, 256kbps Streaming*.
*: For FELCOM500 only
APN • Enter the access point name in ASCII format, using a maxi-
mum of 63 characters (other than [“], [’]).
• Access point cannot be entered when a [9] is put in the
checkbox beside [SIM APN].
User account for APN Enter the user name specified by provider (alphanumeric and
symbol, a maximum of 29 characters).
Password for APN Enter the user name specified by provider (alphanumeric and
symbol, a maximum of 29 characters).
IP address (Global) • Select how to get the IP address, [Automatic] or [Manual].
• Enter the IP address when [Manual] is selected.
DNS server (Global) • Select how to get the address of DNS server, [Automatic] or
[Manual].
• Enter the IP address of the priority DNS server when [Man-
ual] is selected.
• Enter the IP address of the alternative DNS server when
[Manual] is selected.
Item Description