Marine GPS System User Manual

7-2
b) Press the ENT key.
c) Repeat a) and b) to complete the com-
ment. A comment may contain 10
characters.
d) Select ENTER.
e) Press the ENT key.
9. Press the ENT key.
Note 1: If you manually entered a waypoint
number which already exists the following
message will appear on the display:
Overwrite?
ENT: YES
ESC: NO
In this case you may overwrite the waypoint
by pressing the ENT key or press the ESC
key to escape.
Note 2: If you do not need to change mark
shape or enter a comment, simply press the
ENT key at the "WPT at Own Position" dis-
play to enter the waypoint in the default
waypoint mark shape and youngest empty
waypoint number.
Entering a waypoint by the cursor
1. Press the WPT key. The menu for selec-
tion of waypoint entry method appears.
2. Press ▲ or ▼ to select Cursor.
3. Press ENT key. The display prompts you
to select position.
Place cursor on
desired location.
ENT: Enter MENU: Sel Mode
Figure 7-5
4. Operate the Cursor Pad to place the cur-
sor on position desired.
5. Press the ENT key.
6. Follow steps 4 through 9 in "Entering a
waypoint at own ship's position."
Entering waypoints by latitude and
longitude
1. Press the WPT key.
2. Press the WPT key to select WPT List.
3. Press the ENT key. The waypoint list ap-
pears.
WAYPOINT LIST
No.
001
002
003
010
: Cursor : Page
ENT: Edit CLR: Delete WPT
MENU: Sel Mode
LAT/LONG
COMMENT
_ _ ° _ _ . _ _ _ ’ N
_ _ _ ° _ _ . _ _ _ ’ E
_ _ _ _ _ _ _ _ _ _ _ _
_ _ ° _ _ . _ _ _ ’ N
_ _ _ ° _ _ . _ _ _ ’ E
_ _ _ _ _ _ _ _ _ _ _ _
_ _ ° _ _ . _ _ _ ’ N
_ _ _ ° _ _ . _ _ _ ’ E
_ _ _ _ _ _ _ _ _ _ _ _
_ _ ° _ _ . _ _ _ ’ N
_ _ _ ° _ _ . _ _ _ ’ E
_ _ _ _ _ _ _ _ _ _ _ _
Figure 7-6 Sample waypoint list
4. Press ▲ or ▼ to select vacant waypoint
number. To scroll the list, press
.
5. Press the ENT key. The waypoint edit
screen appears.
Edit = Waypoint: 001
Mark:
Cmnt:
_ _
970125 12
_ _ ˚ _ _ . _ _ _ ’ N _ _ _ ˚ _ _ . _ _ _ ’ E
: Cursor : Column
ENT: Enter : N/S, E/W
ESC: Escape
Figure 7-7 Waypoint edit screen
6. Enter latitude and longitude. (To switch
latitude or longitude polarity, press
before entering position data.)
7. Press ▼.
8. Select mark shape, if desired.
9. Press the ENT key.
10. Enter comment, if desired.