User manual

12
6. INITIAL SETTINGS
Checking Operation
1. Turn on the GP-150.
2. Confirm that "OK" and "BEACON RCVR INSTALLED" are displayed on the self-test
display.
Confirm that "BEACON RCVR
INSTALLED" is displayed when
DGPS function is provided.
BEACON RCVR INSTALLED
DATA 3: DATA OUTPUT
PROGRAM MEMORY =OK
SRAM =OK
=OK
Internal Battery
Self-test display at equipment start up
3. Press MENU ESC, 8 and 1. Confirm that "OK" are displayed for PROGRAM MEMORY,
SRAM, Internal Battery, GPS and BEACON.
DGPS Setup
The default setting is "manual".
Automatic DGPS setup
GP-150 can automatically select optimum reference station. If it takes more than five (5)
minutes to fix DGPS position at the automatic mode, switch to manual mode. Use the
manual mode when an external beacon receiver has no automatic function of station
selection.
1. Press MENU ESC, 9 and 7 to display the WAAS/DGPS SETUP menu.
WAAS SEARCH Auto Man (GEO=134)
Freq. 323.0kHz
Baud Rate 200 bps
WAAS/DGPS SETUP
MENU : Escape
ENT : Enter
: Select
MODE Of
GPS Of
CORRECTIONS DATA SET : 00
DGPS Station Auto Man List*
: These items appear when "Man" is selected.
*: Only when the internal beacon receiver is equipped.
DGPS SETUP menu
2. Press
S or T to select MODE and press W to select INT BEACON.
3. Press
S or T to select DGPS Station.