User manual

6. INITIAL SETTINGS
13
4. Press W to select Auto.
5. Press the NU/CU ENT key.
6. Press the MENU ESC key.
Manual DGPS setup
Enter frequency and baud rate of station.
1. Press MENU ESC, 9 and 7 to display the WAAS/DGPS SETUP menu.
2. Press
S or T to select MODE and press W to select INT BEACON.
3. Press
S or T to select Ref. Station.
4. Press
X to select Man.
5. Press
T to select Freq.
6. Enter frequency in four digits (283.5 kHz to 325.0 kHz).
7. Press the NU/CU ENT key. "Baud Rate" appears in reverse video.
8. Press
W or X to select baud rate; 25, 50, 100 or 200 bps.
9. Press the MENU ESC key.
Nearest DGPS station list
The STATION NEAREST LIST shows the five closest DGPS beacon stations, including
user-programmed stations. For user-programmed stations, see Operator’s Manual.
1. Press MENU ESC, 9 and 7 to display the WAAS/DGPS SETUP menu.
2. Press
S or T to select MODE and press W to select INT BEACON.
3. Press
S or T to select Ref. Station.
4. Press
X to select List.
After the message “PLEASE WAIT” appears, the following list is shown. Asterisked
stations mean user-programmed stations.
Freq.
STATION NEAREST
MENU : Escape
ENT : Enter
: Select
1 320.5kHz
2 320.5kHz
3 316.0kHz
4 320.0kHz
5 288.0kHz
RNG BRG
0.6nm
22.3nm
70.3nm
87.2nm
93.7nm
202 *
244
348
77
110
USER Setup
No Yes
*: User-programmed station
5. Press
or to select the station desired.
6. Press the ENTER key.
7. Press the MENU ESC key.