User manual

6. INITIAL SETTINGS
22
14) Output data from the computer. When loading data is completed, the cursor shifts to
Stop.
15) Press the MENU ESC key.
Setting DATA 4 to DGPS
An external DGPS receiver can be connected to the DATA 4 port.
Follow the procedure below to setup the GP-150 according to the specifications of the
DGPS receiver.
1) Press MENU ESC, 9 and 5.
2) Press
S or T to select Level.
3) Press
W or X to select level; RS232C or RS422.
4) Press the NU/CU ENT key.
5) Press
W or X to select DGPS.
6) Press
T to select To Next Page.
DATA 4 I/O SETUP <DGPS> 2/2
To previous Page
First Bit
Parity
Stop Bit
Baud Rate
: Select
ENT: Enter MENU: Escape
MSB LSB
EVEN ODD NONE
12
4800 9600
DATA 4 I/O SETUP <DGPS> menu
7) Press
S or T to select First Bit.
8) Press
W or X select first bit; MSB or LSB.
9) Press
T to select Parity.
10) Press
W or X to select parity bit; EVEN, ODD or NONE.
11) Press
T to select Stop Bit.
12) Press
W or X to select stop bit; 1 or 2.
13) Press
T to select Baud Rate.
14) Press
W or X to select baud rate; 4800 or 9600.
15) Press the NU/CU ENT key.
16) Press the MENU ESC key.