Operator's Manual

5. ROUTES
5-8
5.6 How to Change the Name of a Route
The default route name is “RTE” plus the number of the youngest empty route number
(RTE-001 - RTE-200). To change the name, follow the procedure shown below.
1. Press the MENU key to open the menu then select the [Routes] tab in the [Routes]
menu.
2. Use the RotoKey to select a route. Push the key to show the Routes List pop-up
menu.
3. Use the RotoKey to select [Rename] to show the [Rename] box.
4. Use the RotoKey to enter a new name. Rotate the RotoKey to select a character
then push the key to validate your selection.
5. Press the MENU key to close the menu.
5.7 How to Delete a Route
You can delete routes separately or together. An active route cannot be deleted.
5.7.1 How to Delete an Individual Route
CANCEL key
Put the cursor on the route to delete then press the CANCEL key.
Route list
Follow the procedure below to delete a route by using the Route list.
1. Press the MENU key to open the menu then select the [Routes] tab in the [Routes]
menu.
2. Use the RotoKey to select the route then push the key to show the Routes List
pop-up menu.
3. Use the RotoKey to select [Delete].
4. Press the MENU key to close the menu.
5.7.2 How to Delete All Routes
1. Press the MENU key to open the menu then select the [Routes] tab in the [Routes]
menu.
2. Use the RotoKey to select the route then push the key to show the Routes List
pop-up menu.
3. Use the RotoKey to select [Delete].
4. Press the MENU key to close the menu.