Operator's Manual

6. RADAR
6-10
4. Push the RotoKey to finish. The VRM is then fixed at the range selected.
6.7.3 How to Deactivate a VRM
1. Push the RotoKey to show the soft controls. (In the default arrangement, a short-
push activates VRM1 and a long-push activates VRM1 and VRM2.)
2. Select [VRM] and [Clear 1] or [Clear 2].
The selected VRM and its indication are erased.
You can also erase a VRM with the EBL/VRM pop-up menu. Put the cursor in the VRM
box then push the right-click button to show the EBL/VRM pop-up menu. Rotate the
RotoKey to select the VRM then push the key to erase.
VRM2
VRM1
VRM box
Target
+
153