User's Manual

3.2. Installing the New Data
If an MFD needs to be updated with the new charts, you can download them using the
links provided above. You may also return your existing 1TB (not 500GB) External
Chart Hard Drive to Furuno to be updated at no charge. If you have not ordered an
External Chart Hard Drive, this would be an excellent and highly recommended time to
do so. You can order one containing the latest Library, using part number MM3-WRL-
DHD ($200 list price).
Copy the data at the root of the SD-Card(s). If you downloaded the files from Internet,
make sure to unzip them before transferring them on the SD-Card.
Note that if your MFD has Software v2.07, you can use a large SD-Card (16GB for
example) and transfer multiple files at the same time.
Note: On the MFDBB, it is highly recommended to load the new chart data via the USB
port using an SD-Card to USB adapter or a large USB Flash Drive (16GB for example).
Insert the SD-Card into the upper slot of the MFD to which the data is to be uploaded.
On the MFDBB, it is recommended to load the charts from one of the USB 2.0 ports
(making the transfer much faster).
IMPORTANT: When loading multiple charts at the same time, make sure you don’t
overload the MFD memory. To know how much data you can load onto the MFD, look
at the number of Memory Slots remaining (Menu -> Chart Catalog) and multiply this
value by two. This will give the maximum number of Gigabits that you can load on the
MFD (ex: if four memory slots are available, you can load up to 8GB of data onto the
SD-Card or Flash Drive)
Press the [MENU] key, select the “Chart” page and then select “Data Catalog”. Press
the “Install Data” button.