Installation Instructions

Page 15
The transfer will begin and a window displaying a progress bar will appear (as seen in
Figure 4.5).
Figure 4.5
4.3. Unlock Chart Data
Note: Unlock Codes are not necessary for the USA NOAA Data (U.S. Satellite Photos,
NOAA S57 Vector Charts or NOAA Raster Charts). This section applies only to Chart
Packages that have been purchased.
Charts not included as standard on the NavNet 3D MFD are encrypted because of
royalty payments due to each Hydrographic Office. Unless an Unlock Code is entered,
the charts copied into the NavNet 3D MFD cannot be viewed. The chart ordering
process is based on SystemID (to identify the customer) and Unlock Codes (provided
after purchase to unlock the chart).
The SystemID is required to purchase charts and must be provided when the chart is
ordered. In order to access the SystemID, the NavNet 3D network must be set-up and
configured properly. Press [MENU] on any NavNet 3D display and turn the RotoKey
(clockwise) to select the “My NavNet” menu page. (See Figure 4.6):
Figure 4.6
Simply order the Chart(s) using the Chart Part Number and the SystemID.
Note: The Chart Part Number(s) can be found online on the Furuno USA website
(www.furunousa.com)