Installation Instructions

Page 6
Each link redirects you to a page where you can see the actual coverage of the file (and
see if multiple files are required). The map is interactive, meaning that you can pan or
zoom:
Figure 2.6
To download the file, find the download button at the center of the area (surrounded in
red on the picture above) and put the cursor over it. A link will appear allowing you to
download the corresponding ZIP file.
Figure 2.7
2.2. Unzip the Downloaded File
When the file download is complete, unzip and save the file in a folder designated by
you.
2.3. Transfer Data to the SD-Card or USB Flash Drive
You can only use SD-Cards (2GB or less) to transfer Chart Data to an MFD8/12.
However, you can use a USB Flash drive (2, 4, 8 or 16GB) to transfer multiple charts at
once to the MFDBB using the USB2.0 port on the processor (much faster than using the
SD-Card slot).
2.3.1. Copy the Chart Data
How to copy a single file (such as a High Resolution Satellite Photo area):