Installation Instructions

Page 16
An Unlock Code can only authorize one specific area (one Unlock Code per area per
type of chart - Raster or Vector). An Unlock Code is linked to a specific SystemID (the
same Unlock Code cannot be used to unlock the same area on different systems).
The Unlock Code may be entered at any time from the Chart Catalog.
Right Click on the area whose status is “Locked” and choose “Insert Unlock Code” (as
seen in Figure 4.8)
Figure 4.8
Use the RotoKey to enter the Unlock Code:
• Rotate the RotoKey to select your character
• Push the RotoKey to validate the current character and move to the next one
• Press the [CANCEL] key to move back and correct a previous character.
Note: This operation may also be performed via a mouse and keyboard, if installed
An automatic process is also available to enter the codes using a file and an SD-Card
(avoiding you to type manually all the Unlock Codes on the MFD).
Simply go to http://www.maxsea.fr/timezero/uc and follow the process describe on the
page.
5. Memory Availability
5.1. Introduction
Every NavNet 3D MFD comes preloaded with the following data for the U.S:
- USA Raster Charts (no Unlock Code required)
o SDUS01RMAP03.dbr (US North East)
o SDUS02RMAP03.dbr (US South East)
o SDUS03RMAP03.dbr (US Gulf Coast)
o SDUS04RMAP03.dbr (US Great Lakes)
o SDUS05RMAP03.dbr (US West Coast)
o SDUS06RMAP03.dbr (US Hawaii)
o SDUS07RMAP03.dbr (US South Alaska)
o SDUS08RMAP03.dbr (US Aleutian Islands)
- USA Vector Charts (no Unlock Code required)