Installation Instructions

Page 19
6. Appendix
6.1. How to Format an SD-Card
6.1.1. Introduction
SD-Cards must be formatted properly before transferring files to them for use with
NavNet 3D.
You can use the default function of Windows (Vista/XP or 2000) however we highly
recommend you use a formatting program that complies with the SD Memory Card
specification.
6.1.2. Format an SD-Card Using Software (recommended)
Download and Install the formatting software available at:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Once the software is installed, insert the 2GB SD-Card you want to format and launch
“SDFormatter” (Start > All Programs > Panasonic > SDFormatter V2.0). The Drive
Letter of the SD-Card should automatically be selected (click “Refresh if not”). (see
Figure 6.1)
Figure 6.1
Leave all of the options on the default settings and click on “Format”. A confirmation
message will appear upon completion (see Figure 6.2)
Figure 6.2