Brochure

Hi-Brite Multi Touch Marine Monitors
MU170T/190T/240T
17" Hi-Brite Multi Touch Monitor 19" Hi-Brite Multi Touch Monitor 24" Hi-Brite Multi Touch Monitor
MU170T MU190T MU240T
DISPLAY CHARACTERISTICS
Screen Size 17 inches, 5:4 Aspect Ratio* 19 inches, 5:4 Aspect Ratio* 24 inches, 16:9 Wide Aspect Ratio*
Resolution
1280 x 1024 1280 x 1024
1920 x 1080
Contrast Ratio (typical) 1,000 : 1 1,000 : 1 3,000 : 1
Viewing Angle (typical) +/- 80° (typical) (Up/Down/Left/Right) +/- 89° (typical) (Up/Down/Left/Right)
Max Brightness (typical) 1,000 NITS Hi- Brite 800 NITS Hi- Brite 1,000 NITS Hi- Brite
INTERFACE
Analog RGB (D-SUB/15 pins) 2 ports
DVI (DVI-D) 2 ports
Composite Video (NTSC/PAL) 3 ports
Supported Resolutions VGA to SXGA VGA to SXGA VGA to WUXGA
POWER SUPPLY
115 & 230 VAC, 50/60Hz + 24 VDC
Note: You may connect either AC or DC power or both. When both sources are connected,
power will be sourced from the AC input. If AC input is lost, there will be an uninterrupted switch-over to DC input.
ENVIRONMENT (EN60529 test method)
Temperature -15°C to +55°C
Waterproong IP66 ( front panel), IP22 (rear panel)
Hi-Brite Multi Touch Monitor Specifications
MU170T - Multi Touch Monitor
(Not Drawn to Scale)
MU190T - Multi Touch Monitor
(Not Drawn to Scale)
MU240T - Multi Touch Monitor
(Not Drawn to Scale)
Dimensions and Weights
MU170T – Flush Mount
13.6 lbs.
MU190T – Flush Mount
18 lbs.
MU240T – Flush Mount
24.2 lbs.
www.FurunoUSA.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Rev. 913A
Refer to the manual for complete flush mounting dimensions and instructions.
*Note: Only the MU240T should be used as a remote display for the TZT14 or TZT9, as this monitor has a wide aspect ratio for proper video scaling of the TZT MFD video output.