Operator's Manual

23
General Installation Recommendations
Installation
IND100210-12
Housing / Terminal Block Connector Overview
Housing / Terminal Block connectors are available in different sizes (2-pin, 4-pin, 5-pin) which plugs into the
connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal
block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these
connectors, but note that warranty will be void if any damage would occur to either the unit’s original PCB terminal
socket connector or inside the unit (electronic components, boards etc.).
The following table outlines the specications for connecters commonly used by Hatteland Display:
Illustration Pins Manufacturer Details Connector used for module
2-pin Phoenix 1805301
MSTBT 2,5/ 2-STF-5,08
• DC Power IN (24VDC, Single or Dual)
Identied on Hatteland Display product data sheet as:
“Terminal Block 5.08”
Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1805301
4-pin Phoenix 1827732
MC 1,5/ 5-STF-3,81
• Digital Output / Input (Solid State Relay)
Identied on Hatteland Display product data sheet as:
“Terminal Block 3.81”
Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1827732
4-pin Weidmüller 1792970000
BCZ 3.81/04/180F SN BK BX
• CAN Interface (HT 00254 OPT-A1)
Identied on Hatteland Display product data sheet as:
“Terminal Block 3.81”
Reference: http://catalog.weidmueller.com/catalog/Start.do?localeId=en&ObjectID=1792970000
5-pin Phoenix 1827732
MC 1,5/ 5-STF-3,81
• RS-422 / RS-485 / SCOM (Serial Remote Control) / Buzzer
• RS-422 / RS-485 NMEA (PCA100293-1)
• Digital Output (Safety Signal Relay, single)
• Digital Output & Serial I/O (Mech. Relay / RS-422/RS-485)
• Digital Input/Output (HT 00268 OPT-A1)
Identied on Hatteland Display product data sheet as:
“Terminal Block 3.81”
Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1827732
If your installation require additional cable fasteners support, please visit and purchase directly from manufacturer:
*Note: Illustrations below are approximate, actual Housing and Hood may deviate slightly, but function remains the same.
Phoenix Cable Housing - Illustration Weidmüller Cover Hood - Illustration
Phoenix 1803934 - KGG-MSTB 2,5/ 2 (2-pin)
Phoenix 1834369 - KGG-MC 1,5/ 4 (4-pin)
Phoenix 1834372 - KGG-MC 1,5/ 5 (5-pin)
Weidmüller 1005290000 - BCZ 3.81 AH04 BK BX (4-pin)
For Phoenix 2-pin, 4-pin and 5-pin:
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1803934&library=usen&pcck=P-11-02-01&tab=1
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1834369&library=usen&pcck=P-11-02-01&tab=1
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1834372&library=usen&pcck=P-11-02-01&tab=1
For Weidmüller 4-pin:
http://catalog.weidmueller.com/procat/Accessories.jsp;jsessionid=4E3AF6206ACA756C44BD69A5B6F62D48?page=Accessories&productId=(%5b1792970000%5d)