- FURUNO VIDEO PLOTTER OPERATOR'S MANUAL RP-25

2. VIDEO PLOTTER
2-13
2.5.2 Entering line
You can enter the line similar to mark.
1. Pres the [MARK] key to show ENTER MARK menu.
2. Press the numeric key to select line shape desired.
No.14 through 20 are for line. Shapes of line No.16 through 20 are as below.
16 NAV LINE
17 COAST
LINE
18 CONTOUR
LINE
19 PROHIBITED
AREAS
20 CABLE
No./name
Shape
White line
3. The line is entered at the position selected on the previous page anytime the
[ENTER] key is pressed.
Entering independent lines
When you enter the independent line at the new position, do the following steps.
Otherwise, the line becomes one.
1. Press the [MARK] key to show ENTER MARK menu.
2. Press the [2], [1] key in order to select LINE CHANGE (item 21).
3. Press the [ENTER] key.
4. Press the numeric key for new line shape.
5. Press the [ENTER] key.