Operation Manual

5. ROUTES
5-14
5.9.7 XTE lines
The XTE line for port side is red, for starboard side it is green.
You can show or hide these lines.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [Routes].
3. Select the [ON] icon in [Display XTE Lines] to show the XTE
lines, the [OFF] icon to hide the XTE lines. For [ON], go to the
next step.
4. Select [XTE Value] to display the software keyboard.
5. Set the length of the XTE lines (the distance from your ship)
to display then select [Confirm].
6. Select [Close] to exit the menu.
5.9.8 Waypoint arrival notification
The waypoint arrival notification feature releases audio and visual notifications when
your ship reaches a go to point. For the arrival timing, see paragraph 5.9.5. The noti-
fication message "Waypoint Crossing" appears. Activate or deactivate this feature as
follows.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Routes].
3. Select the [ON] icon in [Waypoint Crossing Notification] to activate this feature, the
[OFF] icon to deactivate this feature.
4. Select [Close] to exit the menu.
5.9.9 End of route notification
The end of route notification feature releases audio and visual notifications when your
ship reaches the end of a route. For the arrival timing, see paragraph 5.9.5. The noti-
fication message "End of Route" appears. Activate or deactivate this feature as fol-
lows.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Routes].
3. Select the [ON] icon in [End of Route Notification] to activate this feature, the
[OFF] icon to deactivate this feature.
4. Select [Close] to exit the menu.
XTE lines
(Red: port,
Green: starboard)