User's Manual

29
(1) Network Configuration
This page allows you to see available TZT9/14/BB units on the network.
As shown at left, the IP address(es) of TZT9/14/BB units on the network will be shown
on the page. In this example, two (2) sets of TZT9/14/BB are networked. On the
Network Config page, select either of the IP addresses to wirelessly access and operate
that TZT9/14/BB.
(2) Application Configuration
This page allows you to switch the position of the slider bar between the left and right edge of the
screen. In default, the slider bar is at the left edge. To change the position to the right edge, tap [Zoom Bar Position]
and select [Right].
Default: [Left]
Changed to [Right]