Quick Start Guide

Manual
ENDURANCE
High Performance Earbuds
WIRELESS
In This Package
*Bluetooth Earbuds *2 replacement Eartips
*Micro USB Charging Cable *Quickstart Guide
MICROPHONE + VOLUME/ MEDIE CONTROLLER OVERVIEW
1. Power on/ off. Phone answer -call button.
2. Long press for next song, short press for raise volume.
3. Long press for previous song, short press for lower volume.
4.Microphone.
5. LED indicator.
6. Charge port.
CHARGING DEVICE
This Bluetooth earbud has two 65mAh rechargeable batteries. To charge earbud, follow steps below.
1. Insert USB end of micro cable, included, into computer USB port.
2. Connect micro end of cable into the media controllers micro port.
3. Red indicator light is ON when battery is charging.
4. Blue indicator light is ON when battery is fully charged.
5. Battery is fully charged in about 2 hours.
6. ways to recharge: Wall outlet, car, computer.
OPERATING DEVICE
A. Power On/ Off
Function Operation LED indicator
Power on Press and hold the power button for 3 seconds, you will hear the voice prompt "power on" Blue indicator is on
Power off Press and hold the power button for 3 seconds, you will hear the voice prompt "power off" RED indicator is on
B. Pairing Earbuds
1. After you hear pairing, to enter pairing mode.
2. Press the power button for about 5 or 6 seconds until red and blue LED's blink alternatively.
3. On your device's Bluetooth menu, find and select "Stanley Bluetooth Earphones", you will hear
"Pairing successful" "connected", your earbuds and device are now paired.
C. Phone Calls
Press Power buttone to answer and end incoming calls.
1
2
3
4
5
6
190 9029 TG3

Summary of content (3 pages)