Datasheet

37
Cabinets & Enclosures
email: [e-mail] www.fusiondatacom.com
FUSION 5 RING CABLE MANAGEMENT BAR
A 5 Ring 1U Management Bar with 3 rings fixed whilst
the outside rings are able to rotate through 360 degrees
allowing vertical and horizontal cable management.
FUSION CABLE TRAY
Available in 150mm width.
(100mm, 200mm & 300mm available on request)
FUSION STANDARD CABLE
MANAGEMENT BAR
Available in 1U and 2U sizes with four 70mm
Management Rings – Black finish.
1U MANAGEMENT BAR PART NO. T70-2406
2U MANAGEMENT BAR PART NO. T70-2407
5 RING ADJ MANAGEMENT BAR PART NO. T70-2383
18U 150MM CABLE TRAY PART NO. T70-2441
24U 150MM CABLE TRAY PART NO. T70-2442
27U 150MM CABLE TRAY PART NO. T70-2443
39U 150MM CABLE TRAY PART NO. T70-2445
42U 150MM CABLE TRAY PART NO. T70-2446
45U 150MM CABLE TRAY PART NO. T70-2447
FUSION CABLE DUMP
An idea which addresses the problem of reducing excess length patch
leads. Install the unit near the bottom of the rack, unclip the front and
place excess patch leads into the cable dump, taking care not to over
bend the cable. The plastic fingers will allow cables to exit in a neat
and orderly fashion once the cover is fitted.
Available in 1U and 2U heights.
FUSION BLANKING PANELS AND SPACE BARS
The 19” Blanking Panels provide a neat way of closing off any unused space
in a rack and give a neat and tidy appearance to the finished installation.
Available in sizes 1U, 2U, 3U and 4U and 1 (15mm) and 2 (30mm) Space.
Colour – Black
FUSION BRUSH PANELS
Used to give a smarter appearance to a cabinet, and prevent dust ingress.
Available in 1U height.
1U CABLE DUMP PART NO. T70-2368
2U CABLE DUMP PART NO. T70-2369
BRUSH PANELS PART NO. T70-2372
1U BLANKING PANELS PART NO. T70-2408
2U BLANKING PANELS PART NO. T70-2409
3U BLANKING PANELS PART NO. T70-2410
4U BLANKING PANELS PART NO. T70-2411
1 SPACE BLANK 15MM (
1
/
3
BLANK) PART NO. T70-2564
2 SPACE BLANK 30MM (
2
/
3
BLANK) PART NO. T70-2565