Instruction Manual

Usage Instructions
To get started with using Smartspeed PRO, you will need the following;
1. Your PRO system
2. A supported Apple or Android device with Bluetooth enabled and an internet connection
3. A computer that is connected to the internet
1. DOWNLOAD THE SMARTSPEED APPLICATION
Download the Smartspeed app by visiting either the iOS app store if you are using an Apple device,
or Google Play store for an android device.
2. REGISTER YOUR ACCOUNT
You must register your account before you will be able to start using your system. To register, launch
the Smartspeed app on your mobile device, click Register, and complete the form. You need to be
connected to the internet to do this.
3. MAKE YOUR FIRST TEAM LIST
If you do not have an internet connection and computer with you then you can skip this step, but it
is highly recommended in order to get the proper Smartspeed experience. To create your first team
list, follow the instructions in our article on using the Smartspeed Online service. If you don’t want to
do this right now, we have pre-installed a default team you can use to get started.
4. SET UP YOUR SMARTHUB
Please refer to the SmartHUB instruction manual for this step.
5. SET UP YOUR GATES FOR TESTING
Tripod assembly
4. Loosen the tripod knob and pull its legs away from the stem.
5. Push down on the knob assembly until the supports are horizontal.
6. Extend the tripod to your desired height. We recommend extending one segment of the
tripod to its full extension.
7. Connect the reflectors and remote data units, ensuring that the tripod neck is firmly
tightened.
Attaching the timing gate
8. Line up the tripod connection with the bayonet the top of the tripod.
9. Press down, into the tripod, and twist the timing unit into a locked position.
10. When ready, you may turn the unit on by pressing the power button
11. Verify the unit turns on by viewing the power LED on the back of the unit
Aligning your timing gates
12. Place the reflector tripod opposite the PRO unit. The reflector can be up to 5 meters away
from the PRO timing unit.
13. Stand behind the PRO timing unit. Hold the unit with one hand and hold the tripod neck with
the other hand to keep the tripod in place
14. Turn the PRO unit on by pressing its power button on the front of the unit.